Magnum Remote Panel - ME-ARC50The Magnum ME ARC50 Remote Panel is simple to use, yet allows full set up of all the standard and advanced features available in Magnum inverters. The ME ARC Magnum Remote Control Panel also has the option of controlling the advanced features of the ME AGS N Automatic Gen Start and the ME BMK Battery Monitor Kit using a network connection to the inverter. This allows auto start of a generator based on battery state of charge, instead of just based on

MyMidNite (free

NEC 2008 Requirement: The National Electrical Code (NEC 2008) requires DC ground fault protectors on all solar installations

Copper Bus Bars: Comes with tin-plated copper bus bars for circuit breakers (one for breakers

- C1D2 - Class 1

The sealant/adhesive required will depend on roof membrane material and is not included in the Solar Flex kit

including the DCGFP63 DC or AC Din Rail breakers and 12 panel mount breakers or DC-GFP80 breakers

Certified according to the IEC 61215 (Crystalline silicon terrestrial photovoltaic modules - Design qualification and type approval) and to the IEC 61730 (Photovoltaic module safety qualification

The MPSH –Magnum Panel

This model has a load current of 30 amps and a system voltage of 12/24 volts

000 AIC: High interrupt capacity for robust fault protection

If the battery falls below 11

5% Non-Sag Properties Semi self-leveling Application Temperature 40°F to 110°F (4°C to 43°C) Tack Free Time 20 – 40 minutes Curing Rate 3/16" per 24 hours Shrinkage Low Shore A Hardness (ASTM D 2240) 10 Tensile Strength (ASTM D 412) 100 psi Elongation at Break (ASTM D 412) 460% Movement Accommodation Factor ±25% Service Temperature 40°F to 190°F (4°C to 88°C) Shelf Life 9 months (store below 80°F / 27°C)