Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the ring creep properties under wet or dry conditions1 Scope This document specifies methods for determining the ring creep properties for glass reinforced thermosetting plastics (GRP) pipes. Properties include the creep factor and the long term specific creep stiffness. Testing is performed under either wet (total immersion in water) or dry conditions. Dry creep testing is typically performed for the assessment and control of raw material consistency. Wet creep testing is typically undertaken to

enabling plant availability of biosolid-borne cadmium and reducing the effect of plant diseases

Noise is not a significant hazard for this type of machinery

including information about residual risks to be provided by the manufacturer

a portable spot welding gun or guns

ISO 20896-1 improves the performance of digital impression devices and ensures the data collected is reliable

FBS EN 3155-053 best practice guidelines helps to manufacture robust contacts and can withstand rough environment facilitating the smooth functioning of aircraft

1) and on the format and location of the manufacturer’s name and address as required by the medical devices directives (5

The maximum temperature for short circuit conditions for silicone rubber is 350 °C based on a duration of 5 s

requirements and tests of devices located on the high-pressure side of acetylene manifold systems as defined in BS EN ISO 14114

The gas plant may include normal combustion with air and/or oxygen

PD 6507 discusses standards for metric screw threads and metric fasteners

Glass electrodes play an important part in the instrumentation for chemical analysis and physicochemical studies