Paper and board. Determination of grease resistance - Turpentine test for voids in glassine and greaseproof papers1 Scope This part of ISO 16532 specifies a method for the determination of the grease resistance of paper and board. It provides an accelerated comparison of the relative rates at which oils or greases, such as those commonly found in foodstuffs, can be expected to penetrate voids in papers such as greaseproof or glassine, where the grease or oil resistance is provided by mechanical means only. It is not applicable to grades of paper or board that are

with ferrule-secured or spliced eye terminations and spliced or ferrule-secured endless slings made from 8 mm to 60 mm diameter 6 strand ordinary lay steel wire rope with fibre or steel core and 8 strand ordinary lay steel wire rope with a steel core conforming to EN 12385-4

may be found in alternative standards e

Manufacturer of mechanical handling equipment

Aluminium alloys have corrosion resistance properties

The document has been broken down into self-contained clauses and annexes

The performance of waterproofing sheets tends to diminish over their operational life

E1 to E4 and F1 to F3 in IEC 60404-1

immersion technique

protection to pits and tanks

ISO 29463-5 provides the reference test procedure for determining the efficiency of filters at their most penetrating particle size (MPPS)

provides recommendations for the modernization

and between processes and functional groups (and job titles) can make the subject of service management confusing to the new manager