Marshalltown 600CM CONCRETE MIXER, 1.5 hp, FULLY ASSEMBLED W/ ON/OFF SWITCHDETAILS MARSHALLTOWN Concrete Mixers utilize a Quad Mixing System that uses a four piece replaceable paddle and blade combination to create four different mixing patterns within the drum for a more consistent mix for your pour. Choose between a 6 or 9 cu. ft. mixing capacity to suit your needs. Both options feature a 25 RPM drum rotation, a frictional handbrake lock, and a drum tilt wheel that allows you to pour from either side of the Mixer. The 6

Air Exhaust Port Thread Gender

) 4 Motor Current (Amps) 13/6

eliminating the need for casters

• Operating temperature of -50°C to +50°C (-58°F to +122°F)

0252" / rev

This bottle is the same thread as most airbrush paint bottles so the cover can be used directly on your paint bottle

Stock Number: 140133

and a completely redesigned swing away control panel

Components: Large flywheel for extra cooling and longer life · ASME safety valves · Pressure gauge · Tank shut-off valve · Tank drain valve automatically drains liquid from air receiver · Intake filter/silencer · Belt tightening system pulls engine straight to ensure constant belt alignment · Hour meter displays the number of hours compressor has been in operation · Low oil shutdown shuts unit down when oil falls below adequate levels · Air-cooled after cooler removes up tp 65% fo moisture and drops temperature within 10-degrees of ambient

The JET Coolant System

the internal parts of your pump remain protected from wear and tear caused by prolonged inactivity

the CM20 is the first continuous mixer on the market to be rated for a standard 120V circuit so you can plug it in and start mixing anywhere on the site