Ball Joint Outer - MINI Cooper / Base / S / JCW / R50 / R52 / R53Ball joints are spherical bearings that connect the control arms to the steering knuckles. They are used on virtually every automobile. A ball joint consists of a bearing stud and socket enclosed in a casing; all these parts aremade of steel. The bearing stud is tapered and threaded, and fits into a tapered hole in the steering knuckle. A protective encasing prevents dirt from getting into the joint assembly. Usually, this is a rubber like boot that

27 inch 159 mmTravel: 9

The included wrist pin is recommended for performance engines not exceeding 125HP per cylinder

it is analyzed and used to determine if changes in location or pitch of FDS channels are necessary before going to production

PURFLUX has the essential high performance industrialization know-how

Add OPTIONAL Clutch Install Kit

8L & 8N Audi

At lower engine speeds and during cruise operation the valves are closed and produce a deeper exhaust note

The GENUINE Variable Valve Timing (VVT) Solenoid produces fewer emissions

Rubber (elastomeric) dampers are only tuned for a specific narrow bandwidth of harmonics and they cannot tune up or down to what your engine is producing

which comes complete with everything you need to convert your S-Line car to accept an AWE Tuning dual outlet exhaust

75 inch4ft 9 inchBRAIDED HOSE FITTINGS-10ANSANDWICH PLATE FITTINGS-10ANCAUTIONIt is the installer's responsibility to check all thermostat plugs

3" for the front and 0